-40%

Cabinet/Desk AV Cooling fans with adjustable thermostat & multispeed/white model

$ 28.77

Availability: 63 in stock
  • Type: Fan
  • Condition: New
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Brand: AV Cabinet Cooling
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Restocking Fee: No
  • Item usage: Cool your AV or computer cabinet
  • Country/Region of Manufacture: United States
  • MPN: AVCC-CAB2x80-MT
  • Item must be returned within: 30 Days

    Description

    Thermostatically-controlled Cabinet Cooling Fan System  (White model)
    This cooling system is designed to be mounted in your enclosed equipment cabinet or computer desk, where it will quietly pull the warm air out and exhaust it outside.
    The system comes with an adjustable thermostat, which turns the fans on and off at the temperature you set.   In addition, YOU control the fan speed, using the multi-speed power supply.
    It has 2 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings, which are combined into a single housing to make mounting easy.
    It is intended to help cool:
    Home Theater Cabinets / Computer Desks /
    Receivers / Amplifiers / Stereos / Audio Visual Systems / Aquarium equipment bases / Kitchen base cabinets / Wine cooler cabinets.
    What's
    Included?
    THE COOLING SYSTEM INCLUDES:
    1 x dual-80mm fan cabinet unit, 1 x adjustable thermostat, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.
    Note:  In the listing pictures, the cabinet cooling systems are shown in two views: 1) against a woodgrain panel, to show how it might look when mounted in a cabinet and 2) against a colored panel, displaying the complete system.
    These panels are used for display purposes only, and are not included with the system.
    1 x dual-80mm
    cabinet fan unit
    (2 fans), with
    mounting plates
    and grills.
    The mounting
    screws are shown
    already installed.
    1 x adjustable
    thermostat, with
    a 5 foot power
    control cable.
    No batteries are
    required for this
    unit. The therm
    attaches to your
    cabinet using
    Velcro pads.
    1 x multi-speed
    power transformer,
    with a 4-1/2 foot
    cable. It lets
    you choose from
    6 different speeds
    for the fans.
    Features
    The cooling system has 2 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.
    The mounting plate & grills seal air and make installation easy.   The fan unit is securely fastened to your cabinet by screws.
    This model has a white mounting plate and front grill, and stainless silver screws on the front.  The back (non-visible) side is black.
    The system includes an adjustable thermostat, which is mounted on the inside of your cabinet.  It allows you to set the temperature for the fan to come on and turn off.  This rugged thermostat does not require batteries, and will function untended for years.  The thermostat has adhesive Velcro pads on the back, to make mounting in your cabinet easy.
    Also includes a multi-speed power transformer, which plugs into any 120 volt outlet.  You control the speed of the fan, using this adjustable transformer.  It can be set to any one of 6 different speeds.
    INTERNATIONAL BUYERS:
    The unit's power transformer (supplied with the cooling system), can be switched to either 110/120 volt or 220/240 volt operation.  However, the transformer uses the standard US-style 2-prong plug.
    Contact me if you need an adapter plug (
    there is no charge
    ), and specify one of the three types:  1) NZ/AU  (2 slanted prongs) 2) Euro (2 round prongs), or UK (three large prongs).
    Even at medium speeds settings, the fans will replace a volume of air equal to that of small to medium cabinet areas several times per minute (see airflow specs below).
    All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
    The standard system comes set up so that hot air enters the front of the fan unit (finished side, with mounting plate and grills), and exits out the back.
    If you need to have air coming out the front, just let me know.  There is no extra charge for this option.  You can also easily change the fan orientation later, if necessary.
    The system comes with instructions and a mounting template to facilitate installation.
    It comes completely assembled, with all components installed, wired and ready to go!
    Specifications
    Dimensions:
    The 80mm dual-fan cabinet cooling unit measures approximately 4-5/8" high x 8" wide, which includes the mounting plate.  The required hole is approximately 3-1/4" high x 6-5/8" wide.  The unit is 1-1/4" thick behind the mounting plate, and only requires about 1/3" additional space for airflow.
    Thermostat specifications:
    The thermostat is 3" square, and 1-1/4" deep (measured from the front to the back).
    It can be set from below 50F to 95F, or 10C to approx. 35C.
    Maximum current draw:
    .32 amps or 4 watts.  Normal operation (at lower speeds) will draw less current and watts.
    Bearing type:
    Super quiet, long lasting Fluid Dynamic bearings.
    The table below shows specifications for
    both of the 2 fans
    ,
    when run together,
    at several different speeds.
    The shaded area on the table indicates suggested fan speeds for this system.
    With cabinet cooling, slow (and quiet) are the way to go!
    Fan Speed
    Full
    3/4
    2/3
    1/2
    1/3
    1/4
    CFM (cubic feet of air per minute)
    62
    46
    40
    32
    20
    16
    DB (decibels/ noise level)
    22
    19
    16
    13
    10
    7
    Fan RPM (speed)
    2000
    1500
    1320
    1000
    660
    500
    If you would like to see this cooling system's installation instructions, please contact me and I will supply a .PDF file with the contents.
    Payment, Shipping
    & Warranty
    Payment:
    You can pay using Paypal, or by using a major credit card, after your purchase.
    Shipping:
    Within the U.S., shipping is normally by Priority Mail.  For International shipments, I use USPS First Class International.
    Import duties, etc.:
    International Buyers – Please Note:
    Import duties, taxes and charges are
    not included
    in the item price or shipping charges. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
    Returns:
    Within the first 30 days after receipt, systems which are in original condition can be returned for a full refund of the purchase price.  Please contact me for shipping address and instructions
    .
    Warranty:
    All systems are covered by a 12 months parts & labor warranty.
    YOUR SATISFACTION IS GUARANTEED!
    Custom Systems
    Please contact me if you have any questions, or if you want to discuss a custom cooling system to fit your special needs:
    Click here to ask a question
    You can also visit my Ebay store, where you will find systems designed for a number of different cooling needs:
    Click here for my store
    All text and images on this page (other than those provided by Ebay), copyright © 2007-2017 by DR McKenzie. Rev. 051717